Hayati Pro Max E-liquid 100ml Vape Juice

What is Hayati Pro Max E-liquid (100 ml)?

First, a quick overview of the product based on the listing:

• The e-liquid comes in a 120 ml bottle (with 100 ml of liquid)

• It is 0 mg nicotine in its base form (nicotine free)

• Ratio is 70% VG / 30% PG (VG = Vegetable Glycerin, PG = Propylene Glycol)

• It is formulated for sub-ohm vape kits (i.e. devices with coils below 1 ohm)

• The bottle has a childproof cap and tamper-evident seal

• It is “ready for 10 ml nic shots”, meaning you can add nicotine shots if you prefer nicotine in your vape

Because it is 0 mg base and you can optionally add nicotine shots, it gives some flexibility. But always make sure your final mixture is safe and within recommended nicotine limits.

Introduction

Imagine an e-liquid that brings more than just flavor; one that aims to deliver “more ml, more satisfaction.” That’s the promise behind Hayati Pro Max E-Liquid. Crafted by Hayati’s in-house team (part of the PAX / Hayati Vapor brand), this juice is positioned as a premium offering in their e-liquid line.
It is intended for adult vapers looking for generous volume, vibrant flavour options, and a reasonably balanced liquid base. The design goal seems to be: give you enough liquid (100 ml refill container) to last, with a flavour you enjoy, and a base formulation that delivers satisfying vapor without being overly thick or thin. The brand also emphasizes “food grade” ingredients, hinting that they claim to use quality standards in their manufacturing.

In short: Hayati Pro Max 100 ml is a mainstream e-liquid choice for vapers who want a decent volume, a variety of flavour options, and a middle ground in throat hit vs vapor density

Detailed Specifications

Here’s a breakdown of the technical and physical specs for Hayati Pro Max E-Liquid 100 ml:

Additional Notes and Observations

• The VG/PG blend of 70/30 suggests this liquid is meant to lean toward producing plentiful vapor (VG) while still retaining enough PG for flavour delivery and throat hit.

• Because the nicotine is listed as 0 mg, this indicates the product is a nicotine-free version, perhaps part of a line with different nicotine strengths.

• “Food grade” is mentioned on their page, likely to reassure buyers that the ingredients meet certain safety / purity standards.

• The product is clearly labelled with a warning on the site: that these products “are not risk free” and that they “provide nicotine, which is addictive,” even though this particular variant is 0 mg. (This is a standard disclaimer. )

• The site also includes an age gate (only for those 21 or older) to restrict access to minors.

Flavour Table and Tasting Notes:

How flavour perception might vary

• On lower wattage, you may taste more of the “base fruit” and less of the sharper or menthol notes.

• On higher wattage or more airflow, cooling / “ice” and sharper edges become more pronounced.

• VG-rich blends (70% VG) often produce thicker vapor and smoother throat hit; PG carries flavor more strongly. So some flavour subtlety might be muted compared to high-PG e-liquids vape.

• “Ice / menthol” versions may feel stronger in cold / high-wattage settings.

How to Use

1. Check compatibility of device
   Since this is 70% VG / 30% PG and made for sub-ohm kits, it works good for lower-resistance coils (e.g. 0.2 -- 0.8 ohm). Avoid using it in devices made only for high nic salt style (very high PG) unless the manufacturer allows it.

2. Add nicotine shots if desired

• If you want nicotine, get “nic shots” (usually 18 mg or 20 mg nicotine in 10 ml).

• Shake the bottle, then open the cap, and pour in the nic shot.

• Replace the cap, and shake well for maybe 30 seconds to a minute to mix thoroughly.

• Do the math: mixing 100 ml of 0 mg with 10 ml of, say, 18 mg gives ~10 mg in 110 ml (a bit less because volume doesn’t always sum exactly).

3. Prime the coil / wick in your atomizer
   Before vaping, you must prime the coil (so it doesn’t burn dry). Steps:

• Remove the coil or open the tank.

• Put a few drops (2–4 drops) of e-liquid onto the exposed cotton/wick holes on the coil.

• Reassemble the tank.

• Fill the tank with the e-liquid (the Hayati Pro Max mixture).

• Let it sit (“steep” or “soak”) for maybe 5–10 minutes so the cotton is fully soaked, especially on a new coil.

4. Set your power / wattage properly
   Because this is for sub-ohm vaping, you’ll usually run in a moderate-to-high wattage range (depending on your coil). Start low (e.g. the lower bound of your coil’s recommended wattage) and gradually increase until you find a good balance (flavour, vapor, no burnt taste).

5. Inhale / vape
   Use your device normally: when you press the fire button (or draw, in auto-draw devices), vapor is created. Take moderate puffs, don't chain-vape too fast, especially with high-VG liquids, so airflow and saturation keep up.

6. Maintain and refill

• Monitor your liquid level; don’t let the tank run bone dry.

• Replace coils or wicks when flavor degrades or you detect burnt taste.

• Clean your tank occasionally (rinse, dry, reassemble) to keep flavour fresh.

Where to Use:

Because of its 70/30 VG/PG ratio and sub-ohm design, the ideal devices are:

• Sub-ohm tanks / clearomizers with mesh coils rated below 1 ohm (e.g. 0.2–0.8 ohm)

• Mods / box mods that allow wattage control and sufficient power to vaporize thicker liquids

• Rebuildable atomizers (RBA/RDA/RTA) provided your build handles that viscous liquid and you have good airflow

• Advanced pod kits devices that explicitly support freebase e-liquids (not just nic salt pods)

• Avoid: basic “cigalike” devices or starter pods that are designed for high nic salt (very thin, mostly PG) they may struggle to wick 70% VG properly.

The “where” also implies “when / in what circumstances”: you might use it wherever vaping is permitted and safe (away from sensitive environments, children, or non-smokers who may dislike vapour). Always check local vape regulations (some places ban e-liquids or vaping).