Vape Coils

Vape coils are the core component of any vape kit – they heat the e-liquid and turn it into vapour for inhalation. Inside your tank or pod sits a small metal coil (often wrapped in a spiral or flat mesh) wrapped around a cotton wick. When you fire the device, battery power heats the wire, the cotton soaks up juice, and the heat vaporises it into smooth vapour with consistent flavour. Coils wear out over time – flavour fades, you get burnt tastes, or vapour drops off – so swapping them keeps your device performing properly.

We carry coils from trusted brands like Aspire, Voopoo, Smok, Geekvape, Vaporesso, and , covering everything from tight MTL draws in pod kits to large vapour productions in larger tanks. Lower resistance coils (0.15–0.4 ohm) suit DTL vaping with higher wattage for high vapour output, while higher ones (0.8–1.6 ohm) work best for MTL setups with nic salts and a cigarette-style draw. Mesh coils heat faster and more evenly for better taste and longer life, especially with thicker high-VG liquids. Always prime a fresh coil properly – drip juice on the cotton, fill up, wait a few minutes – and match the coil to your juice and style to avoid quick burnout or coil build-up. Stock up in packs for better value and keep your setup performing consistently every day.

Specifications

• Coil Type — Mesh, traditional wire, ceramic, or multi-coil (quad, triple, sextuple, decuple depending on model)

• Resistance Range — 0.12 ohm to 1.6 ohm (low for sub-ohm/DTL, higher for MTL/pods)

• Pack Sizes — Mostly 3-pack or 5-pack for better value and less frequent reordering

• Compatibility — Specific to brand tanks/pods: Aspire Odan, Voopoo PnP/Drag, Smok TFV/Nord/RPM, Geekvape Z/P/M/B, Vaporesso GT/NRG/Cascade, OXVA XLIM, etc.

• Wattage Suitability — 10–25W for MTL/high-resistance, 40–120W+ for sub-ohm/low-resistance coils

• Material — Kanthal, stainless steel, or mesh builds; some with ceramic wicking for a cleaner taste

• Liquid Compatibility — 50/50 or high-PG for MTL, 70/30+ VG for sub-ohm/DTL to avoid flooding or dry hits

• UK Compliance — All listed coils from reputable brands, no restricted substances, safe for retail sale

Features

• Mesh Technology — Most modern coils use mesh strips for faster, more even heating – improved flavour delivery, faster heating, and longer life before gunk builds up.

• Multi-Coil Designs — Quad, triple, sextuple, or decuple setups (e.g, Smok V12-X4, T10, V8 Baby T6) spread heat across more surface area for bigger clouds and smoother hits at high wattage.

• Long-Lasting Performance — Premium builds from Geekvape, Voopoo, and Vaporesso perform reliably with proper priming and juice matching – fewer dry or burnt hits compared to cheap generics.

• Plug-and-Play Fit — Easy push-in or screw-in replacement on most tanks/pods – no complex rebuilding required, ideal for everyday vapers.

• Versatile Vaping Styles — Covers tight MTL draws (ideal for use with nic salts), restricted DTL, or full-on cloud chasing – one coil range often suits multiple kits.

• Clean & Consistent Flavour — Ceramic elements (Vaporesso GT Core) or high-quality mesh reduce hot spots and burnt cotton taste, especially good with fruity or menthol e-liquids.

• Value in Packs — 3 or 5 coils per box means less hassle reordering and a cost-effective option over single coils – stock lasts longer for heavy vapers.

• Reliable Brands — Aspire, Smok, Voopoo, Geekvape, Vaporesso, and OXVA are trusted in the UK – consistent stock, good reviews, and spares are easy to find.

How to Use 

Fitting a new coil is straightforward once you’ve done it a couple of times. First, take the old coil out – most tanks twist the base or unscrew the coil head, pull it straight out, and dispose of it. Give the tank a quick rinse under the tap if it’s heavily used or clogged (don’t soak the whole thing if it’s got electronics). Grab your fresh coil, drip a few drops of e-liquid straight onto the cotton holes or wick ends to prime it – this stops dry hits and burnt tastes from the start. Pop the coil back into the tank (make sure it clicks or screws in properly), then fill the tank slowly through the side or top fill port, avoiding the airflow holes to stop leaks. Snap everything shut, allow the e-liquid to settle naturally, and leave it standing upright for 5–10 minutes so the cotton soaks up properly. Fire the device at low wattage first (start 10–20W below the recommended max), take a few gentle puffs, and gradually increase the wattage to the optimal performance range once it’s tasting right.

Keep an eye on how it performs – flavour will start dropping off, or you’ll get a burnt cotton taste when the coil’s done. Don’t chain vape at max power straight away or push high-VG juice through a high-resistance MTL coil – it’ll gunk up fast and ruin the life. For sub-ohm/low-resistance coils, stick to 70/30+ VG liquids and higher wattages for large vapour production and clean hits. MTL/pod coils (0.8–1.6 ohm) love 50/50 or high-PG juices with nic salts for that smooth throat hit. Change coils every 1–3 weeks, depending on how much you vape and what juice you use – sweeter or darker liquids reduce coil lifespan faster. Always store spares in a cool, dry place, and recycle the old ones properly. Done right, a good coil lasts longer and keeps every puff tasting fresh without the hassle.

Explore the Vape Coils Range

Our vape coils range covers the most popular replacement heads stocked by UK online sellers right now. From Aspire Odan 0.20 ohm mesh coils for solid DTL performance in the Odan tank, through to Voopoo PnP TW packs that give brilliant value with five coils and easy plug-and-play on Drag X/S or PnP tanks – these sell quickly due to consistent flavour and reliable lifespan. Smok dominates the sub-ohm side with TFV18 Mini triple 0.2 ohm, TFV12 series (V12-X4 quad, T10 decuple, T8, Q4), V8 Baby T6, and RPM/Nord coils – all built for large vapour production, high wattage, and pairing with high-VG juices without quick gunk-up. Geekvape brings the P-Series 0.4/0.5 ohm and Z Series for smooth airflow in Z tanks, while Vaporesso GT Core 0.4 ohm uses ceramic for richer flavour in NRG or Cascade setups. OXVA XLIM C coils suit compact pod vapers wanting MTL-friendly hits, and older favourites like Smok Vape Pen 22 or Aspire BVC 1.6 ohm keep the basics covered for tight draws and nic salts.

This range suits everything from everyday pod kits (Vaporesso XROS, Voopoo Argus, OXVA XLIM, Aspire Gotek) to full-on sub-ohm tanks (Smok TFV, Geekvape Z, Voopoo PnP). Low-resistance options push high vapour output for cloud chasers, higher ohm ones give that cigarette-style MTL pull with smooth nic delivery – no complicated setup or rebuilding required. Brands like Smok, Geekvape, Voopoo, Aspire, Vaporesso, and OXVA are trusted for consistent quality, making them high-demand products available in boxes or singles. Whether you’re after flavour-focused mesh coils, long-lasting multi-coil monsters, or simple MTL heads, these keep kits running properly and encourage repeat purchases – reliable products with consistent performance and strong sales demand.